Multi Switch Box, With cross circuit

JS032.01V001

1 LED switches operated by up to 3 drivers. Allows the LED switch with switching function to different drivers.

Standby power consumption	0.10 W
Operation mode	with cross circuit, Deactivated cross circuit
Color/finish	black
Dim. (L x W x H)	45 x 45 x 14 mm
Degree of protection	IP20
Features	3 sockets for integrated drivers, 3 sockets for wired sensor switches
Installation	surface mounting (self-adhesive)
Scope of delivery	1 multiple switch box incl. tape and 3 connecting cables
Installation reference	2 operating modes can be selected using an integrated toggle switch: Cross: On/off switching at different switches; No cross: Switching on with switch 1, 2, or 3. For switching off, all switches that were switched on have to be activated again

Additional information

The multiple switch box is used to connect up to three integrated drivers and max. three wired sensor switches to enable mixed control of multiple LED lights. Connected integrated drivers are controlled at the same time by wired sensor switches that can be installed at different places.

Drill hole ∅ for plug: 12 mm(1/2'').
Alternative to the supplied 1000 mm (39 3/8'') lead for multi-swich box.
The drill hole ∅ for the male plug and the female socket of the switch leads is 12mm (1/2'').
Note max. output power of used driver!